TAIL GATE > REASSEMBLY |
| 1. INSTALL TAIL GATE HINGE ASSEMBLY LH |
![]() |
Using a torx socket wrench T40 , install the tail gate hinge assembly LH with the bolt and 2 screws.
| 2. INSTALL TAIL GATE HINGE ASSEMBLY RH |
| 3. INSTALL TAIL GATE STAY ASSEMBLY |
![]() |
Using a torx socket wrench T40 , install the tail gate stay assembly with the screw and washer.
| 4. INSTALL TAIL GATE STAY STOPPER |
![]() |
Using a torx socket wrench T40 , install the tail gate stopper with the screw.
| 5. INSTALL TAIL GATE |
![]() |
Install the tail gate onto the vehicle.
![]() |
Connect the tail gate stay.
| 6. INSTALL TAIL GATE LOCK STRIKER |
![]() |
Install the tail gate lock striker with the 2 bolts.
| 7. INSTALL TAIL GATE HANDLE ASSEMBLY |
![]() |
Engage the 2 claws and install the tail gate handle assembly with the 2 bolts.
| 8. INSTALL TAIL GATE LOCK ASSEMBLY LH |
![]() |
Engage the clip and install the tail gate lock assembly LH with the 2 bolts and clip.
![]() |
Connect the tail gate link as shown in the illustration.
| 9. INSTALL TAIL GATE LOCK ASSEMBLY RH |
| 10. INSTALL TAIL GATE SERVICE HOLE COVER |
![]() |
Using a torx socket wrench T30 , install the tail gate service hole cover with the 8 screws.
| 11. INSTALL TAIL GATE PROTECTOR RH |
![]() |
Engage the 10 claws and install the tail gate protector.
![]() |
Using a torx socket wrench T30 , tighten the 7 screws to the tail gate protector.