Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB (for 4WD and Pre-Runner)

FRONT AXLE HUB (for 4WD and Pre-Runner) > DISASSEMBLY

for Preparation Click here



1. REMOVE KNUCKLE GREASE RETAINER CAP (for Pre-Runner)


F042756
  1. Using a screwdriver and hammer, remove the knuckle grease retainer cap.



2. REMOVE FRONT AXLE HUB OIL SEAL (for 4WD)


F042766
  1. Using a screwdriver and hammer, remove the front axle hub oil seal.



3. REMOVE FRONT WHEEL ADJUSTING NUT (for Pre-Runner)


F042757E01
  1. Using SST and a hammer, unstake the front wheel adjusting nut.

    SST
    09930-00010  



    F042758E01
  1. Using SST, remove the front wheel adjusting nut.

    SST
    09318-12010  



4. REMOVE FRONT AXLE HUB


F042759
  1. Remove the 4 bolts and axle hub from the steering knuckle.

  1. Remove the O-ring from the axle hub.



5. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY


F042760E02
  1. Gently fix the front axle hub in a vise.

  1. Using SST, remove the bearing.

    SST
    09710-30021   (09710-03051)
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)



6. REMOVE FRONT AXLE HUB OIL SEAL


F042761
  1. Using a screwdriver, remove the front axle hub oil seal.