FRONT AXLE HUB (for 4WD and Pre-Runner) > REASSEMBLY |
| 1. INSTALL FRONT AXLE HUB OIL SEAL |
![]() |
Using a brass bar and a hammer, install a new front axle hub oil seal.
| 2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY |
![]() |
Using SST and a press, install a new bearing onto the front axle hub.
| 3. INSTALL FRONT AXLE HUB |
![]() |
Apply MP grease to a new O-ring.
Install the new O-ring onto the axle hub.
Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.
| 4. INSTALL FRONT WHEEL ADJUSTING NUT (for Pre-Runner) |
![]() |
Using SST, install a new front wheel adjusting nut.
| 5. INSTALL FRONT AXLE HUB OIL SEAL (for 4WD) |
![]() |
Using SST and a press, install a new front axle hub oil seal.
| 6. INSTALL KNUCKLE GREASE RETAINER CAP (for Pre-Runner) |
![]() |
Using a brass bar and a hammer, install a new knuckle grease retainer cap.