Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB BOLT

FRONT AXLE HUB BOLT > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT WHEEL


3. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with painted surfaces.



4. REMOVE FRONT DISC BRAKE CALIPER ASSEMBLY (for 2WD)


F050588
  1. Remove the union bolt and gasket from the disc brake cylinder and then disconnect the flexible hose.



    C096927
  1. Remove the 2 bolts, and then remove the brake caliper.



5. REMOVE FRONT DISC BRAKE CALIPER ASSEMBLY (for 4WD and Pre-Runner)


F052164
  1. Remove the bolt and separate the brake tube bracket from the steering knuckle.



    F043120
  1. Using SST, disconnect the brake tube from the disc brake cylinder.

    SST
    09023-00101  

    NOTICE:
    Use a container to catch the brake fluid as it drains out.



    F043121
  1. Remove the 2 bolts and disc brake caliper.



6. REMOVE FRONT DISC


7. REMOVE FRONT AXLE HUB BOLT


F052165E01
  1. Using SST and a screwdriver, remove the hub bolt.

    SST
    09611-12010