HEADLIGHT ASSEMBLY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE RADIATOR GRILLE |
![]() |
Remove the 2 screws.
Using a clip remover, remove the 2 clips.
Disengage the 2 clips and remove the radiator grille.
| 3. REMOVE FRONT BUMPER COVER |
![]() |
Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.
Remove the 6 screws.
Using a clip remover, remove the 7 clips.
Remove the 2 clips.
![]() |
w/ Fog Light:
Disconnect the 2 fog light connectors.
Disengage the 2 claws and remove the front bumper cover.
![]() |
Remove the 6 clips.
| 4. REMOVE FRONT BUMPER FILLER |
![]() |
Using a clip remover, remove the clip
Disengage the 2 claws and remove the front bumper filler.
| 5. REMOVE HEADLIGHT ASSEMBLY |
![]() |
Remove the bolt and 3 screws.
Disconnect the 3 connectors, then remove the LH headlight assembly.
| 6. REMOVE FRONT TURN SIGNAL LIGHT BULB |
![]() |
To remove the front turn signal light socket and bulb, turn them in the direction indicated by the arrow in the illustration.
Remove the front turn signal light bulb from the light socket.
| 7. REMOVE CLEARANCE LIGHT BULB |
![]() |
To remove the clearance light bulb socket and bulb, turn them in the direction indicated by the arrow in the illustration.
Remove the clearance light bulb from the light socket.
| 8. REMOVE NO. 1 HEADLIGHT, BULB |
![]() |
Remove the socket cover.
![]() |
Push the set spring in the direction indicated by the arrow in the illustration.
![]() |
Remove the No. 1 headlight bulb.