Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE REAR COMBINATION LIGHT ASSEMBLY


E076052E01
  1. Remove the 2 bolts.

  1. Slide the tail light (rear combination light) assembly LH toward the rear of the vehicle and release the 2 pins.



    E076053E01
  1. Disconnect the connector, then remove the tail light (rear combination light) assembly LH.

  1. Remove the wire harness clamp.



    E076085E01
  1. To remove the 3 light bulb sockets and 3 bulbs, turn them in the direction indicated by the arrow in the illustration.

  1. Remove the 3 light bulbs from the 3 light sockets.