Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR

WASHER MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT WASHER MOTOR


E076069E01
  1. Check the operation.

    1. Fill the washer jar with washer fluid.

      HINT:
      Operation should be performed with the windshield washer motor and pump assembly installed onto the washer jar assembly.

    2. Connect the positive battery (+) lead to terminal 1 of the windshield washer motor and pump assembly, then the negative battery (-) lead to terminal 2. Check that washer fluid flows from the washer jar.

      Standard:
      Washer fluid flows from the washer jar.