Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WIPER SWITCH


E076074E01
  1. Engage the claw and install the windshield wiper switch assembly.

  1. Connect the 2 connectors.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }



3. INSTALL STEERING COLUMN UPPER COVER
  1. Engage the claw and then install the steering column cover upper.



4. INSTALL STEERING COLUMN LOWER COVER
  1. Engage the 2 claws.

  1. Install the steering column cover lower with the 2 screws.