Home › BODY › MIRROR › OUTER MIRROR SWITCH

OUTER MIRROR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT OUTER MIRROR SWITCH ASSEMBLY


B087562E01
  1. Check the resistance.

    1. Press L on the left/right adjustment switch.

    2. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Terminal Connection
      Mirror Switch Condition
      Specified Condition
      4 (VL) - 8 (B)
      6 (M+) - 7 (E)
      UP
      Below 1 Ω
      4 (VL) - 7 (E)
      6 (M+) - 8 (B)
      DOWN
      Below 1 Ω
      5 (HL) - 8 (B)
      6 (M+) - 7 (E)
      LEFT
      Below1 Ω
      5 (HL) - 7 (E)
      6 (M+) - 8 (B)
      RIGHT
      Below 1 Ω

      If the result is not as specified, replace the outer mirror switch.

    3. Press R on the left/right adjustment switch.

    4. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Terminal Connection
      Mirror Switch Condition
      Specified Condition
      3 (VR) - 8 (B)
      6 (M+) - 7 (E)
      UP
      Below 1 Ω
      3 (VR) - 7 (E)
      6 (M+) - 8 (B)
      DOWN
      Below 1 Ω
      2 (HR) - 8 (B)
      6 (M+) - 7 (E)
      LEFT
      Below 1 Ω
      2 (HR) - 7 (E)
      6 (M+) - 8 (B)
      RIGHT
      Below 1 Ω

      If the result is not as specified, replace the outer mirror switch.