OIL FILTER > INSTALLATION |
| 1. INSTALL OIL FILTER SUB-ASSEMBLY |
![]() |
Remove any dirt or foreign objects from the contact surface of the engine side.
Apply a light coat of engine oil to the O-ring of a new oil filter.
Install the oil filter by hand until the O-ring comes into contact with the seat.
Using SST, retighten it by 3/4 turn.
| 2. ADD ENGINE OIL |
Fill with fresh engine oil.
| Drain and refill with oil filter change | 5.8 liters (6.1 US qts, 5.1 lmp. qts) |
| Drain and refill without oil filter change | 5.1 liters (5.4 US qts, 4.5 lmp. qts) |
| Dry fill | 6.1 liters (6.4 US qts, 5.4 lmp. qts) |
| 3. CHECK FOR ENGINE OIL LEAKAGE |