Home › BRAKE › BRAKE › BRAKE PEDAL

BRAKE PEDAL > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT FLOOR FOOTREST


    B087437E01
  1. Disengage the 2 clips and remove the front floor footrest.



3. REMOVE FRONT DOOR SCUFF PLATE (for Regular Cab)


    B087476E01
  1. Disengage the 8 claws and clip, and remove the front door scuff plate.



4. REMOVE FRONT DOOR SCUFF PLATE (for Access Cab)


    B087436E01
  1. Disengage the 9 claws and clip, and remove the front door scuff plate.



5. REMOVE FRONT DOOR SCUFF PLATE (for Double Cab)


    B087411E01
  1. Disengage the 9 claws and remove the front door scuff plate.



6. REMOVE COWL SIDE TRIM BOARD (for Regular Cab)


    B087438E01
  1. Remove the clip.

  1. Disengage the 2 clips and remove the cowl side trim board.



7. REMOVE COWL SIDE TRIM BOARD (for Access Cab)


    B087438E01
  1. Remove the clip.

  1. Disengage the 2 clips and remove the cowl side trim board.



8. REMOVE COWL SIDE TRIM BOARD (for Double Cab)


    B087438E01
  1. Remove the clip.

  1. Disengage the 2 clips and remove the cowl side trim board.



9. REMOVE INSTRUMENT PANEL UNDER TRAY (for Automatic Transmission)


    B085766E01
  1. Disengage the 4 clips and 2 claws, and remove the instrument panel under tray.



10. REMOVE INSTRUMENT PANEL HOLE COVER (for Manual Transmission)


    B085767E01
  1. Disengage the 4 clips and remove the instrument panel hole cover.



11. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO. 1


    B085780E01
  1. Remove the 2 bolts <B>.

  1. Disengage the 3 clips and remove the lower No. 1 instrument panel finish panel.

  1. Disconnect the connectors.



12. SEPARATE DRIVER SIDE JUNCTION BLOCK


13. SEPARATE MASTER CYLINDER PUSH ROD CLEVIS


F050561
  1. Remove the clip and push rod pin, then separate the push rod clevis.



14. REMOVE BRAKE PEDAL SUPPORT REINFORCEMENT


F050562
  1. Remove the bolt from the reinforcement.



    F050563
  1. Remove the bolt and nut, then remove the reinforcement from the brake pedal support.



15. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY
  1. Disconnect the stop light switch connector from the stop lamp switch.



    F043116
  1. Remove the 4 nuts and brake pedal support.



16. REMOVE BRAKE PEDAL RETURN SPRING


F050564
  1. Remove the return spring from the brake pedal support and brake pedal.



17. REMOVE STOP LIGHT SWITCH ASSEMBLY
  1. Turn the stop light switch counterclockwise, and remove the stop light switch.

  1. Remove the stop light switch mounting adjuster from the brake pedal support.



18. REMOVE BRAKE PEDAL


F043117
  1. Remove the bolt and nut, then remove the brake pedal from the brake pedal support.

  1. Remove the 4 brake pedal bushes from the brake pedal and brake pedal lever.

  1. Remove the 2 collars from the brake pedal and brake pedal lever.



19. REMOVE BRAKE PEDAL LEVER


F043118
  1. Using a screwdriver, remove the 2 E-rings from the brake pedal link pin.

  1. Remove the 2 brake pedal link pins, 2 brake pedal shaft collars and 2 brake pedal links.

  1. Remove the brake pedal lever from the brake pedal.



20. REMOVE BRAKE PEDAL PAD
  1. Remove the brake pedal pad from the brake pedal.