FRONT BRAKE (for 2WD) > REASSEMBLY |
| 1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG |
Provisionally tighten the bleeder plug to the disc brake cylinder.
| 2. INSTALL PISTON SEAL |
Apply lithium soap base glycol grease to a new piston seal.
Install the piston seal onto the disc brake cylinder.
| 3. INSTALL FRONT DISC BRAKE PISTON |
![]() |
Apply lithium soap base glycol grease to the disc brake piston and a new cylinder boot.
Install the cylinder boot onto the front disc brake piston.
Install the disc brake piston into the disc brake cylinder.
| 4. INSTALL CYLINDER BOOT |
![]() |
Install the cylinder boot onto the disc brake cylinder.