FRONT BRAKE (for 4WD and Pre-Runner) > DISASSEMBLY |
| 1. REMOVE CYLINDER BOOT |
![]() |
Using a screwdriver, remove the 4 cylinder boots from the caliper.
| 2. REMOVE FRONT DISC BRAKE PISTON |
![]() |
Prepare a wooden plate to hold the pistons.
![]() |
Place the plate between the pistons and insert a pad into one side.
Use compressed air and remove the pistons one side at a time from the cylinder.
| 3. REMOVE PISTON SEAL |
![]() |
Using a screwdriver, remove the 4 piston seals from the cylinder.
| 4. REMOVE FRONT DISC BRAKE BLEEDER PLUG |
Remove the bleeder plug cap and bleeder plug from the disc brake cylinder.