Home › BRAKE › PARKING BRAKE › PARKING BRAKE PEDAL (for Automatic Transmission)

PARKING BRAKE PEDAL (for Automatic Transmission) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE PARKING BRAKE CABLE ASSEMBLY NO. 1


F050656E01
  1. Disengage the claw A.

  1. Remove the lock nut B, adjusting nut C, clip D and parking brake cable assembly No. 1.



3. REMOVE PARKING BRAKE PEDAL
  1. Release the parking brake pedal.

  1. Disconnect the parking brake switch connector.



    F050701E01
  1. Remove the 3 nuts and parking brake control pedal assembly.



4. REMOVE PARKING BRAKE SWITCH ASSEMBLY
  1. Remove the screw and parking brake switch assembly.



5. REMOVE PARKING PEDAL PAD