Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER (for RA60F)

CLUTCH RELEASE CYLINDER (for RA60F) > DISASSEMBLY

for Preparation Click here



1. REMOVE CLUTCH RELEASE CYLINDER KIT
  1. Remove the boot from the cylinder body.

  1. Remove the push rod from the cylinder body.



    F051056
  1. Using compressed air, remove the piston together with the spring from the cylinder.

    NOTICE:
    Be careful not to damage the inside of the cylinder body.

  1. Remove the bleeder plug cap from the bleeder plug.



2. REMOVE RELEASE CYLINDER BLEEDER PLUG