Home › ENGINE · 2TR-FE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > INSPECTION

for Preparation Click here



1. INSPECT AIR FUEL RATIO SENSOR


    G037947E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      1 (HT) - 2 (+B)
      1.8 to 3.4 Ω at 20°C (68°F)
      1 (HT) - 4 (AF-)
      10 kΩ or higher

      If the result is not as specified, replace the air fuel ratio sensor.