Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › AIR PUMP

AIR PUMP > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE AIR PUMP ASSEMBLY


G037930E01
  1. Remove the 2 bolts, then separate the washer jar.

    HINT:
    Perform the above procedure to make space for removing the air pump assy.



    G037931E01
  1. Disconnect the air injection system No. 1 hose.

  1. Disconnect the air pump connector and wire harness clamp.



    G037932E01
  1. Remove the 3 bolts, then remove the air pump with bracket.



    G037933E01
  1. Disconnect the air pump connector clamp.

  1. Disengage the 3 fittings of the air pump insulator, and remove the air pump from the bracket.