AIR SWITCHING VALVE > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INTAKE AIR CONNECTOR |
![]() |
Disconnect the pressure sensor connector.
Disengage the wire harness clamp.
Disconnect the vacuum hose.
![]() |
Disconnect the No. 2 ventilation hose.
![]() |
Disconnect the vacuum hose.
![]() |
Loosen the 2 hose clamp bolts.
Remove the 3 bolts, then remove the intake air connector.
| 3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Disconnect the mass air flow meter connector.
Disconnect the wire harness clamp.
Loosen the hose clamp bolt, then disconnect the air cleaner hose No. 1.
Disconnect the 2 air cleaner clamps.
Remove the air cleaner cap together with the air cleaner hose No. 1.
| 4. REMOVE NO.1 EXHAUST MANIFOLD HEAT INSULATOR |
![]() |
Remove the 5 bolts, then remove the exhaust manifold heat insulator No. 1.
| 5. DISCONNECT AIR INJECTION SYSTEM NO.1 HOSE |
![]() |
Disconnect the air injection system No. 1 hose from the air switching valve.
| 6. REMOVE INTAKE PIPE INSULATOR |
![]() |
Remove the 4 nuts, then remove the intake pipe insulator.
Remove the 2 gaskets.
| 7. REMOVE AIR SWITCHING VALVE ASSEMBLY |
![]() |
Disconnect the vacuum hose.
Disconnect the air switching valve connector.
![]() |
Remove the 2 nuts, then remove the air switching valve.
Remove the gasket.