Home › TRANSMISSION ยท R155 MANUAL TRANSMISSION › MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL

MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for Access Cab)


C060588E01
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts, 4 bolts and 4 washers, and remove the propeller shaft.



    D033912
  1. Remove the 2 center support bearing bolts from the frame crossmember.



    D033911E01
  1. Pull out the propeller shaft.

  1. Insert SST into the transmission to prevent oil leakage.

    SST
    09325-40010  



2. REMOVE PROPELLER SHAFT ASSEMBLY (for Regular Cab)


C060588E01
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.



    D033911E01
  1. Remove the propeller shaft.

  1. Insert SST into the transmission to prevent oil leakage.

    SST
    09325-40010  



3. REMOVE MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL


G038870E01
  1. Using SST, remove the oil seal.

    SST
    09308-00010  

    NOTICE:
    Do not damage the oil-seal-fitted surface of the extension housing.