OUTER REAR VIEW MIRROR > INSPECTION |
| 1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH |
![]() |
Check the operation.
Apply battery voltage to the terminals and check the operation of the mirror face, as shown in the table and illustration.
| Measurement Condition | Mirror Operation |
| Battery positive (+) - 3 (MV) Battery negative (-) - 1 (M+) | Turns upward (A) |
| Battery positive (+) - 1 (M+) Battery negative (-) - 3 (MV) | Turns downward (B) |
| Battery positive (+) - 2 (MH) Battery negative (-) - 1 (M+) | Turns left (C) |
| Battery positive (+) - 1 (M+) Battery negative (-) - 2 (MH) | Turns right (D) |
| 2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH |
![]() |
Check the operation.
Apply battery voltage to the terminals and check the operation of the mirror face, as shown in the table and illustration.
| Measurement Condition | Mirror Operation |
| Battery positive (+) - 3 (MV) Battery negative (-) - 1 (M+) | Turns upward (A) |
| Battery positive (+) - 1 (M+) Battery negative (-) - 3 (MV) | Turns downward (B) |
| Battery positive (+) - 2 (MH) Battery negative (-) - 1 (M+) | Turns left (C) |
| Battery positive (+) - 1 (M+) Battery negative (-) - 2 (MH) | Turns right (D) |