MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL > REMOVAL |
| 1. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY |
![]() |
Place matchmarks on the propeller shaft flange and differential flange.
Remove the 4 nuts, 4 bolts and 4 washers, and remove the propeller shaft.
![]() |
Remove the 2 center support bearing bolts from the frame crossmember.
![]() |
Pull out the propeller shaft.
Insert SST into the transmission to prevent oil leakage.
| 2. REMOVE EXTENSION HOUSING DUST DEFLECTOR |
Using a plastic hammer, remove the extension housing dust deflector.
| 3. REMOVE MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL |
![]() |
Using SST, remove the transmission extension housing oil seal.