Home › TRANSMISSION ยท RA60F MANUAL TRANSMISSION › OUTPUT SHAFT

OUTPUT SHAFT > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 3 SYNCHRONIZER RING
  1. Remove synchronizer ring No. 3 from the output shaft.



2. REMOVE OUTPUT SHAFT CENTER BEARING
  1. Remove the output shaft center bearing from the output shaft.



3. REMOVE OUTPUT SHAFT REAR BEARING


F051075E01
  1. Using SST and a press, remove the output shaft rear bearing from the output shaft.

    SST
    09950-00020  
    09950-70010   (09951-07100)
    09950-60010   (09951-00510)