Home › TRANSMISSION ยท RA60F MANUAL TRANSMISSION › OUTPUT SHAFT

OUTPUT SHAFT > REASSEMBLY

for Preparation Click here



1. INSTALL OUTPUT SHAFT REAR BEARING


F051076E01
  1. Using SST and a press, install a new output shaft rear bearing onto the output shaft.

    SST
    09316-60011   (09316-00011)

  1. Apply a light coat of grease to the bearing.



2. INSTALL OUTPUT SHAFT CENTER BEARING
  1. Apply gear grease to the output shaft center bearing to the output shaft, and install it onto the output shaft.



3. INSTALL NO. 3 SYNCHRONIZER RING
  1. Apply gear oil to synchronizer ring No. 3, and install it onto the output shaft.