GENERATOR (for BOSCH Made) > INSTALLATION |
| 1. INSTALL GENERATOR ASSEMBLY |
Install the generator assembly with the 2 bolts.
Install the wire harness clamp bracket with the 2 bolts.
Connect the wire harness.
Connect the wire harness to terminal B and install the nut.
Connect the connector to the generator assembly.
Install the wire harness stay with the bolt.
| 2. INSTALL FAN SHROUD |
![]() |
Provisionally install the fan shroud together with the fan pulley.
Install the fan and generator V belt .
Install the fan pulley with the 4 nuts.
Install the fan shroud with the 2 bolts.
Install the 2 cooler hoses into the clamp (with automatic transmission).
Connect the hose to the radiator reserve tank.
| 3. INSTALL RADIATOR SUPPORT TO FRAME SEAL LH |
| 4. INSTALL V-BANK COVER |
Install the V-bank cover with the 2 nuts.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |