RADIATOR > DISASSEMBLY |
| 1. REMOVE RADIATOR DRAIN COCK |
Remove the drain cock plug.
Remove the O-ring from the drain cock plug.
| 2. ASSEMBLE SST |
![]() |
Engage the claw with the overhaul handle by inserting it into the hole in part A as shown in the illustration.
While gripping the handle, adjust dimension B to between 0.2 and 0.3 mm, using the stopper bolt.
| 3. UNCAULK CORE PLATE |
![]() |
Straighten the core plate by gripping it with SST until stopped by the stopper bolt.
| 4. REMOVE RADIATOR TANK UPPER |
![]() |
Lightly tap the radiator tank bracket (or radiator tank pipe) with a soft-faced hammer to remove the radiator tank.
| 5. REMOVE RADIATOR TANK LOWER |