Home › ENGINE · 2TR-FE › ENGINE CONTROL SYSTEM › CRANKSHAFT POSITION SENSOR

CRANKSHAFT POSITION SENSOR > INSPECTION

for Preparation Click here



1. INSPECT CRANKSHAFT POSITION SENSOR


A074841E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      1 (NE+) - 2 (NE-)
      1,630 to 2,740 Ω at COLD
      1 (NE+) - 2 (NE-)
      2,065 to 3,225 Ω at HOT

      HINT:
      Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122°F) and Hot is from 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the camshaft position sensor.