Home › ENGINE ยท 1GR-FE › LUBRICATION › OIL PUMP (for 4WD and Pre-Runner)

OIL PUMP (for 4WD and Pre-Runner) > DISASSEMBLY

for Preparation Click here



1. REMOVE OIL PUMP COVER


A072931E01
  1. Remove the 3 bolts, then remove the oil pipe.

  1. Remove the 2 O-rings.



    A072932E01
  1. Remove the 7 bolts, then remove the oil pump cover, drive rotor and driven rotor.



2. REMOVE OIL PUMP RELIEF VALVE
  1. Remove the relief valve plug.

  1. Remove the relief valve spring and relief valve.