SEAT POSITION SENSOR (for Separate Seat Type) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE SEAT TRACK COVER |
![]() |
Disengage the 2 claws and remove the seat track cover.
| 4. REMOVE FRONT SEAT ASSEMBLY |
![]() |
Disconnect the 2 connectors.
w/ Front Seat Side Airbag:
Disconnect the connector.
Using a clip remover, remove the wire harness clamp.
![]() |
Remove the 4 bolts and front seat.
| 5. REMOVE SEAT POSITION SENSOR |
![]() |
Disconnect the connector from the seat position sensor.
Using a "torx" socket wrench (T30), remove the "torx" screw and the seat position sensor.