Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > CD cannot be Inserted or is Ejected Right After Insertion

for Preparation Click here

1.CHECK CD
  1. Check whether a normal CD is inserted.

    1. Make sure that the CD is a normal audio CD, and that there is no deformation, flaw, stain, burr or other defect on the CD.

      OK:
      A normal audio CD is inserted.

HINT:
  1. Translucent or oddly-shaped CDs cannot be played.
  2. Computer CD-ROMs (even those with music) and CD-R discs cannot be played.
  3. Playing an 8 cm CD does not require an adapter.



NG
CD IS FAULTY
OK


2.CHECK WHETHER CD IS INSERTED PROPERLY
  1. Check whether the CD is inserted properly.

    1. Check whether or not the CD is inserted upside down.

      OK:
      Not upside down.



NG
INSERT CD PROPERLY
OK


3.CLEAN CD


    E050013E01
  1. Clean the disc.

    1. If the disc gets dirty, clean the disc by wiping the surface from the center to the outside, in a radial direction, with a soft cloth as shown in the illustration.

      OK:
      The malfunction disappears.

NOTICE:
Do not use a conventional record cleaner or anti-static preservative.

OK:
Not upside down.



OK
CD WAS DIRTY
NG


4.OPERATION USING ANOTHER CD
  1. Replace the CD with another and recheck.

    1. Replace the CD with another normal one to see whether the same trouble occurs again.

      OK:
      The malfunction disappears.



NG
REPLACE RADIO RECEIVER ASSEMBLY
OK

CD IS FAULTY