Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

VEHICLE STABILITY CONTROL SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


The intelligent tester can be used in steps 3, 6, 9 and 12.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CHECK AND CLEAR DTCS AND FREEZE FRAME DATA

        NEXT


        4.PROBLEM SYMPTOM CONFIRMATION

          NEXT


          5.CHECK CAN COMMUNICATION SYSTEM
          1. Check for output DTCs.

            HINT:
            The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.


            Result
            Proceed to
            CAN communication system DTC not output
            A
            CAN communication system DTC output
            B



          B.
          CAN COMMUNICATION SYSTEM
          A



          6.CHECK AND CLEAR DTCS

            NEXT


            7.PROBLEM SYMPTOM SIMULATION

              Result
              Proceed to
              Symptom does not occur
              A
              Symptom occurs
              B


            B.
            GO TO STEP 9
            A



            8.SYMPTOM SIMULATION

              NEXT


              9.CHECK DTCS (OTHER THAN CAN SYSTEM DTCS)

                Result
                Proceed to
                DTC not output
                A
                DTC output
                B


              B.
              GO TO STEP 11
              A



              10.PROBLEM SYMPTOMS TABLE

                NEXT

                GO TO STEP 12


                11.DTC CHART

                  NEXT


                  12.CIRCUIT INSPECTION

                    NEXT


                    13.PROBLEM IDENTIFICATION

                      NEXT


                      14.REPAIR OR REPLACE

                        NEXT


                        15.CONFIRMATION TEST

                          NEXT

                          END