Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › AIRBAG CUT-OFF SWITCH

AIRBAG CUT-OFF SWITCH > INSPECTION

for Preparation Click here



1. INSPECT AIRBAG CUT OFF SWTCH


    H046214E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.
      Standard : 
      Switch Connection
      Tester Condition
      Specified Condition
      OFF
      1 (MSW+) - 2 (MSW-)
      80 to 120Ω
      ON
      1 (MSW+) - 2 (MSW-)
      320 to 480Ω
      If the result is not as specified, replace the air bag cut off switch.