Home › BODY ELECTRICAL › LIGHTING › TOWING CONVERTER RELAY

TOWING CONVERTER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT TOWING CONVERTER RELAY


E064833E01
  1. Measure the voltage and check the result in accordance with the value(s) in the table below.

    Standard:
    Tester Connection
    Condition
    Specified Condition
    1 - Body ground
    Constant
    Battery positive voltage
    2 - Body ground
    Turn signal switch (right turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 times per minute)
    2 - Body ground
    Depress brake pedal
    Battery positive voltage
    3 - Body ground
    Turn signal switch (right turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 times per minute)
    4 - Body ground
    Turn signal switch (left turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 times per minute)
    4 - Body ground
    Depress brake pedal
    Battery positive voltage
    6 - Body ground
    Constant
    Below 1 Ω
    8 - Body ground
    Depress brake pedal
    Battery positive voltage
    9 - Body ground
    Turn signal switch (left turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 times per minute)