Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2TR-FE ENGINE CONTROL SYSTEM

2TR-FE ENGINE CONTROL SYSTEM > SERVICE DATA



Intake air flow meter sub-assembly
Resistance 4 (THA) - 5 (E2)
Standard
12.5 to 16.9 kΩ at -20°C (-4°F)
2.19 to 2.67 kΩ at 20°C (68°F)
0.50 to 0.68 kΩ at 60°C (140°F)
Camshaft timing oil control valve assembly
Resistance 1 (+B) - 2 (GND)
Standard
6.9 to 7.9 kΩ at 20°C (68°F)
Throttle with motor body assembly
Resistance
1 (M-) - 2 (M+)
0.3 to 100 Ω at 20°C (68°F)
3 (E2) - 5 (VC)
2.0 to 4.0 kΩ at 20°C (68°F)
Accelerator pedal rod assembly
Resistance
5 (EP1) - 4 (VCP1)
1 MΩ or higher
2 (EP2) - 1 (VCP2)
1 MΩ or higher
E.F.I. Engine coolant temperature sensor
Resistance
1 (E2) - 2 (THW)
2.23 to 2.59 kΩ at 20°C (68°F)
1 (E2) - 2 (THW)
0.310 to 0.326 kΩ at 80°C (176°F)
Knock sensor
Resistance 1 (Ground) - 2 (Output)
Standard
120 to 280 kΩ at 20°C (68°F)
E.F.I. Circuit opening relay assembly
Resistance (3 - 5)
Standard
10 kΩ or higher
Below 1 Ω (Apply battery voltage to terminal 1 and 2)
E.F.I. Relay
Resistance (3 - 5)
Standard
10 kΩ or higher
Below 1 Ω (Apply battery voltage to terminal 1 and 2)