Home › ENGINE · 2TR-FE › ENGINE CONTROL SYSTEM › MASS AIR FLOW METER

MASS AIR FLOW METER > INSPECTION

for Preparation Click here



1. INSPECT MASS AIR FLOW METER


G037688E01
  1. Check the operation.

    1. Apply battery voltage across terminals 1 (+B) and 2 (E2G).

    2. Using a voltmeter, connect the positive (+) tester prove to terminal 3 (VG) and the negative (-) tester prove to terminal 2 (E2G).

    3. Blow air into the mass air flow meter and check that the voltage fluctuates.
      If the voltage does not fluctuate, replace the mass air flow meter.



    G037689E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      4 (THA) - 5 (E2)
      12.5 to 16.9kΩ at -20°C (-4°F)
      4 (THA) - 5 (E2)
      2.19 to 2.67kΩ at 20°C (68°F)
      4 (THA) - 5 (E2)
      0.50 to 0.68kΩ at 60°C (140°F)

      If the result is not as specified, replace the mass air flow meter.