Malfunctioning Part
| Function
|
Input Speed Sensor (NCO)
| During an input speed sensor malfunction, shift control is performed using the output speed sensor signal (SP2). During an input speed sensor malfunction, AI-SHIFT*1 and flex lock-up clutch control are prohibited.
|
Output Speed Sensor (SP2)
| During an output speed sensor malfunction, shift control is performed using the input speed sensor signal (NCO). During an output speed sensor malfunction, AI-SHIFT*1 and flex lock-up clutch control are prohibited.
|
No. 1 ATF Temperature Sensor
| During a No. 1 ATF temperature sensor malfunction, flex lock-up clutch control is prohibited.
|
Shift Solenoid Valve S1, S2
| The current to the malfunctioning solenoid valve is cut off and control is performed by operating the other normal solenoid valve. Shift control is performed depending on the failed solenoid as described in the table below.
|
Shift Solenoid Valve SLT
| During a solenoid valve SLT malfunction, the current to the solenoid valve is stopped. This stops optimal line pressure control and shift shock increases. However, shifting is performed using normal clutch pressure control.
|
Shift Solenoid Valve SLU
| During a solenoid valve SLU malfunction, the current to the solenoid valve is stopped. This stops lock-up control and flex lock-up control, and fuel economy decreases.
|