FUEL TANK > REMOVAL |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE NO.1 FUEL TANK PROTECTOR SUB-ASSEMBLY (WITH OFF ROAD PACKAGE) |
| 4. DISCONNECT FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE |
![]() |
Remove the fuel pipe clamp.
![]() |
Disconnect the fuel tank main tube and fuel tank return tube.
Pinch the retainer as illustrated, then pull the fuel tube connectors out of the pipes.
| 5. REMOVE FUEL TANK ASSEMBLY |
![]() |
Loosen the clamp bolt.
Disconnect the fuel breather tube.
Remove the checker of the fuel tube connector from the pipe.
Pinch the retainer of the fuel tube connector, then pull the tube connector out of the pipe.
![]() |
Hold the fuel tank using the mission jack.
![]() |
Remove the 2 fuel tank bands.
Remove the 2 bolts.
Remove the 2 clips and 2 pins, then remove the 2 fuel tank bands.
Slightly jack the fuel tank down and separate the fuel tank to filler pipe hose from the inlet pipe.
Remove the fuel pump cover.
Disconnect the fuel pump connector.
Disconnect the fuel tank vent hose.
Pinch the retainer and pull the fuel tank vent hose connector out of the charcoal canister to disconnect the fuel tank vent hose from the charcoal canister.
Remove the fuel tank assembly.

| 6. REMOVE FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE |
![]() |
Remove the 2 joint clips, then remove the fuel tank main tube and fuel tank return tube.
| 7. REMOVE FUEL SUCTION WITH PUMP & GAUGE TUBE ASSEMBLY |
![]() |
Using a SST, loosen the retainer.
Remove the retainer.
Pull the fuel pump assembly out of the fuel tank.
![]() |
Remove the gasket from the fuel tank.
| 8. DRAIN FUEL |
| 9. REMOVE FUEL TANK TO FILLER PIPE HOSE |
![]() |
Loosen the clamp bolt, then remove the fuel tank to filler pipe hose.
| 10. REMOVE NO.1 FUEL TANK PROTECTOR |
Remove the 4 clips, then remove the fuel tank protector.
