Home › ENGINE ยท 1GR-FE › IGNITION › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE V-BANK COVER


A075593E01
  1. Remove the 2 nuts, then remove the V-bank cover.



3. REMOVE AIR CLEANER ASSEMBLY


A075594E01
  1. Disconnect the ventilation hose No. 2.



    A075595E01
  1. Disconnect the vacuum hose.

  1. Disconnect the mass air flow meter connector.

  1. Remove the 2 wire harness clamps.



    A075596E01
  1. Loosen the 2 hose clamps.

  1. Remove the 2 bolts, then remove the air cleaner.



4. DISCONNECT VENTILATION HOSE


A075645E01
  1. Disconnect the ventilation hose from the intake air surge tank.



5. REMOVE IGNITION COIL ASSEMBLY


G036133E01
  1. Disconnect the 6 connectors.

  1. Remove the 6 bolts, then remove the 6 ignition coils.



6. REMOVE SPARK PLUG
  1. Using a 16 mm spark plug wrench, remove the 6 spark plugs.