FUEL PUMP > DISASSEMBLY |
| 1. REMOVE FUEL SENDER GAGE ASSEMBLY |
![]() |
Disconnect the connector.
![]() |
Disengage the claw fitting and remove the sender gauge by sliding it in the direction as shown in the illustration.
| 2. REMOVE NO. 1 FUEL SUB-TANK |
![]() |
Disengage the 5 claw fittings and remove the fuel pump tank.
![]() |
Separate the connector and disengage the clamp.
| 3. REMOVE FUEL PUMP ASSEMBLY |
![]() |
Disengage the clamp, then disconnect the connector.
![]() |
Disengage the 5 claw fittings and separate the fuel pump from the fuel pump case.
![]() |
Disconnect the connector from the fuel pump.
| 4. REMOVE FUEL PUMP FILTER |
![]() |
Remove the fuel filter from the fuel pump.
| 5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
![]() |
Remove the fuel pressure regulator and the 2 O-rings.