Home › ENGINE ยท 1GR-FE › FUEL › FUEL PRESSURE PULSATION DAMPER

FUEL PRESSURE PULSATION DAMPER > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
  1. Apply a light coat of spindle oil or gasoline to a new O-ring and install it onto the fuel pressure pulsation damper.

  1. Install the fuel pressure pulsation damper onto the fuel delivery pipe.

  1. Install the clip.



2. INSTALL V-BANK COVER
  1. Install the V-bank cover with the 2 nuts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



3. CHECK FOR FUEL LEAK