SIDE AIRBAG SENSOR (for Double Cab) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT DOOR SCUFF PLATE LH |
![]() |
Disengage the 9 claws and remove the front door scuff plate.
| 4. REMOVE REAR DOOR SCUFF PLATE LH |
![]() |
Disengage the 8 claws and remove the rear door scuff plate.
| 5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
![]() |
Remove the front door opening trim weatherstrip.
| 6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH |
![]() |
Remove the rear door opening trim weatherstrip.
| 7. REMOVE LAP BELT OUTER ANCHOR COVER |
![]() |
Disengage the 3 claws and remove the lap belt outer anchor cover.
| 8. REMOVE CENTER PILLAR LOWER GARNISH LH |
![]() |
Remove the bolt and floor anchor of the front seat outer belt.
![]() |
Disengage the 2 claws and 2 clips, and remove the center pillar lower garnish.
| 9. REMOVE SIDE AIRBAG SENSOR |
![]() |
Remove the bolt and the side airbag sensor.
Disconnect the connector from the side airbag sensor.