Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CENTER AIRBAG SENSOR ASSEMBLY

CENTER AIRBAG SENSOR ASSEMBLY > REMOVAL

for Preparation Click here



1. PRECAUTION


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.


3. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type)


    B290397
  1. Remove the shift knob.

  1. Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.



4. REMOVE CONSOLE UPPER REAR PANEL SUB- ASSEMBLY (for Manual Transmission on Separate Seat Type)


    B085770E01
  1. Disengage the 4 clips and claw, and remove the console upper rear panel sub-assembly.



5. REMOVE REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type)


    B290398
  1. Remove the console box carpet.



    B290399
  1. Remove the 2 screws <F> and 2 bolts <B>.

  1. Disengage the 4 claws and remove the rear console box assembly.



6. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type)


    B290400
  1. Remove the 2 instrument panel cup holders.



    B290401
  1. Disengage the 2 clips and 4 claws, and remove the instrument panel cup holder tray.



7. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type)


    E232344
  1. Remove the 2 screws <F>.

  1. Disengage the 2 clips and claw, and remove the front console box.



8. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type)


    E232345
  1. Remove the shift knob.

  1. Remove the 2 screws <F>.

  1. Disengage the 2 clips and claw, and remove the front console box.



9. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type)


    B290402
  1. Remove the shift knob.

  1. Remove the box bottom mat.

  1. Remove the 2 instrument panel cup holders.



    E232346
  1. Remove the clip and 2 bolts <A>.

  1. Disengage the 2 clips and claw, and remove the front console box.



10. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type)


    B290403
  1. Remove the shift knob.

  1. Remove the box bottom mat.

  1. Remove the 2 instrument panel cup holders.



    E232347
  1. Remove the clip and 2 bolts <A>.

  1. Disengage the 2 clips and claw, and remove the front console box.



11. REMOVE CENTER AIRBAG SENSOR ASSEMBLY


F052157
  1. Disconnect the holder (with connectors) from the center airbag sensor assembly.

  1. Remove the 3 bolts and the center airbag sensor assembly.