Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CURTAIN SHIELD AIRBAG ASSEMBLY (for Regular Cab)

CURTAIN SHIELD AIRBAG ASSEMBLY (for Regular Cab) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
  1. Perform a Diagnostic System Check (Click here).



    B203541
  1. With the curtain shield airbag installed on the vehicle, perform a visual check. If any of the defects mentioned below are present, replace the curtain shield airbag with a new one:

    1. Cuts, small cracks or marked discoloration on the curtain shield airbag.



2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
  1. Perform a Diagnostic System Check (Click here).



    B203542
  1. With the curtain shield airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag with a new one:

    1. Cuts, small cracks or marked discoloration on the curtain shield airbag.
    2. Cracks or other damage to the connectors.

    CAUTION:
    For removal and installation of the curtain shield airbag, be sure to follow the correct procedure.