Home › ENGINE ยท 2TR-FE › COOLING › RADIATOR

RADIATOR > ON-VEHICLE CLEANING

for Preparation Click here



1. CHECK FINS FOR BLOCKAGE


A073603E03
  1. If the fins are clogged, wash them with water or a steam cleaner and then dry them with compressed air.

    NOTICE:
    1. If the distance between the steam cleaner and core is too small, the fins may be damaged. So, keep to the following injection distances.
    Injection Pressure kPa (kgf/cm2, psi)
    Injection Distance mm (in.)
    2,942 to 4,903 (30 to 50, 427 to 711)
    300 (11.811)
    4,903 to 7,845 (50 to 80, 711 to 1,138)
    500 (19.685)
    1. If the fins are bent, straighten them with a screwdriver or pliers.
    1. Be careful not to expose electronic components to water.