Home › ENGINE ยท 2TR-FE › COOLING › RADIATOR

RADIATOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (for Pre Runner and 4WD Type)
  1. Remove the 4 bolts, then remove the engine under cover No. 1.



3. DRAIN ENGINE COOLANT

CAUTION:
To avoid the danger of being burned, do not remove the radiator cap while the engine and radiator are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator.

  1. Remove the 4 bolts, then remove the engine under cover No. 1. (PRE RUNNER AND 4WD TYPE)



    G038197E01
  1. Install a vinyl hose onto the radiator side.



    G038198E01
  1. Install a vinyl hose onto the engine side.



    G038199E01
  1. Loosen the engine drain plug.

  1. Loosen the radiator drain plug.

  1. Remove the radiator cap and drain coolant.

  1. Drain the coolant from the reservoir tank.



4. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH


G038206E01
  1. Disengage the 9 clips, then remove the radiator support to frame seal LH.



5. REMOVE FAN SHROUD


A086838E01
  1. Loosen the 4 nuts shown in the illustration.

  1. Remove the fan and generator V belt.



    G038207E01
  1. Disconnect the radiator reserve tank hose from the radiator.



    G038208E01
  1. Disconnect the oil cooler inlet and outlet hoses from the fan shroud. (for Automatic Transmission)



    G038209E01
  1. Remove the 2 bolts shown in the illustration.



    G038210E01
  1. Remove the 4 nuts, then remove the fan shroud and fan with fluid coupling together.

    NOTICE:
    Make sure that the fan shroud and fan with fluid coupling do not make any contact with the radiator when they are removed.



    G038211E01
  1. Remove the fan pulley.



6. REMOVE RADIATOR ASSEMBLY


G038230E01
  1. Disconnect the radiator hose inlet.



    G038231E01
  1. Disconnect the radiator hose No. 2.



    G038232E01
  1. Disconnect the oil cooler inlet and outlet hoses. (for Automatic Transmission)



  1. Remove the 4 bolts, then remove the radiator.


    G036141E01