STEERING PAD > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE LOWER NO. 2 STEERING WHEEL COVER |
![]() |
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the lower No. 2 steering wheel cover.
| *1 | Protective Tape |
| 4. REMOVE LOWER NO. 3 STEERING WHEEL COVER |
| 5. REMOVE STEERING PAD |
Check that the ignition switch is off.
Check that the cable is disconnected from the negative (-) battery terminal.
![]() |
Using T30 "TORX" socket wrench, loosen the 2 bolts completely.
Pull the steering pad toward rear.
![]() |
Using a screwdriver with its tip wrapped with protective tape, release the 2 airbag connector locks.
Disconnect the 2 airbag connectors.
| *1 | Protective Tape |
| *2 | Locking button |
![]() |
Disconnect the horn terminal to remove the steering pad.