Home › BODY ELECTRICAL › METER › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



METER GAUGE AND WARNING/INDICATOR

Meter/Gauge 
Item
Detail
Speedometer
Indicates vehicle speed based on signals received from brake actuator assembly (CAN).
Tachometer
Indicates engine speed based on signals from ECM (CAN).
Fuel Gauge
Indicates fuel level in accordance with signals received from fuel sender gauge assembly (Direct line).
Engine Coolant Temperature Gauge
Indicates engine coolant temperature in accordance with signal from ECM (CAN).
ODO/TRIP Meter
Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed.

Warning/Indicator 
Item
Signal Description
TURN SIGNAL
Receives turn signal from turn signal flasher assembly (Direct line).
BEAM
Receives beam signal from multiplex network body ECU (Direct line).
CHARGE
Receives malfunction signal from generator (Direct line).
OIL PRESSURE
Receives engine oil pressure warning signal from engine oil pressure switch assembly (Direct line).
MIL
Receives malfunction check engine warning signal from ECM (Direct line).
DOOR
Open door indicator illuminates when receiving signal from multiplex network body ECU (Direct line).
D BELT
Receives driver seat belt signal (unfastened) from driver seat belt buckle switch (Direct Line).
BRAKE
for Vacuum Booster Type:
  1. Receives malfunction signal from brake actuator assembly (CAN).
  2. Receives brake fluid level warning signal from brake fluid level warning switch (Direct line).
  3. Receives parking brake switch signal from brake actuator assembly (CAN).
for Hydraulic Booster Type:
  1. Receives malfunction signal from brake actuator assembly (CAN).
  2. Receives brake fluid level warning signal from brake actuator assembly (CAN).
  3. Receives parking brake switch signal from brake actuator assembly (CAN).
MAINT REQD*1
Calculates accumulated total vehicle travel distance.
HEAD*1
Receives headlight (low beam) signal from multiplex network body ECU (Direct line).
TAIL*2
Receives taillight illumination signal from multiplex network body ECU (Direct line).
CRUISE*3
Receives malfunction signal from ECM (CAN).
AIRBAG
Receives malfunction signal from airbag sensor assembly (CAN).
FUEL
Receives fuel empty signal from fuel sender gauge assembly (Direct line).
A/T OIL TEMP*4
Warning is displayed when oil temperature is high (CAN).
AUTO LSD*5
Receives signals from brake actuator assembly while AUTO LSD is operating (CAN).
SLIP*5
Receives malfunction signal from brake actuator assembly (CAN).
A-TRAC*6
Receives A-TRAC signal from brake actuator assembly (CAN).
VSC OFF*5
Receives VSC off signal from brake actuator assembly (CAN).
TRAC OFF
Receives TRAC off signal from brake actuator assembly (CAN).
DAC*7
Receives DAC signals from brake actuator assembly (CAN).
4WD*8
Receives 4WD signals from 4WD control ECU (Direct line).
4LO*8
Receives 4LO signals from 4WD control ECU (Direct line).
RR DIFF LOCK*9
Receives rear differential lock signals from 4WD control ECU (Direct line).
ABS
Receives malfunction signal from brake actuator assembly (CAN).
TIRE PRESSURE
Receives low tire pressure signal from tire pressure warning ECU (Direct line).
RSCA OFF*5
Receives RSCA OFF signal from airbag sensor assembly (Direct line).
  1. *1: for U.S.A.
  2. *2: except U.S.A.
  3. *3: w/ Cruise Control
  4. *4: for Automatic Transmission
  5. *5: w/ VSC
  6. *6: w/ Active Traction Control
  7. *7: w/ Downhill Assist Control
  8. *8: for 4WD
  9. *9: w/ Rear Differential Lock

Buzzer 
Item
Signal Description
Key Reminder
Buzzer ON: Ignition switch is off, key is inserted, and driver side door is open.
Seat Belt Warning
Buzzer ON: When ignition switch is ON, seat belt is unfastened, and vehicle speed is 20 km/h (12.4 mph) or more.
PKB Reminder
Buzzer ON: When ignition switch is ON, parking brake is operating, and vehicle speed is 5 km/h (3.1 mph) or more.
Manual Shift Reverse*1
Buzzer ON: When Ignition switch is ON, shift position is reverse.
Brake System Buzzer
Buzzer ON: Receives signal from brake actuator assembly (CAN).
  1. *1: for RA60 and RA60F Manual Transmission