GARAGE DOOR OPENER SYSTEM > ON-VEHICLE INSPECTION |
| 1. INSPECT GARAGE DOOR OPENER |
![]() |
Press each switch and check that the red LED turns on. If one or more of the switches does not turn on the LED, confirm normal operation of the fuse and wire harness. If the fuse and wire harness are malfunctioning, replace them. If not, replace the garage door opener (inner rear view mirror) (Click here).
| *a | These Switches |
| *b | LED |
| 2. INSPECT GARAGE DOOR OPENER REGISTRATION AND TRANSMITTING |
![]() |
Check if the test transmitter code was successfully registered.
| *a | Test Transmitter |
| *b | Press |
![]() |
Press the garage door opener switch that was registered to the tester transmitter. Check if the "HomeLink" tester's green LED illuminates.
| *a | "Home Link Tester" |
| *b | Press |
When the inspection is complete, reregister the customer's transmitter code(s) again.