Home › ENGINE · 2TR-FE › ENGINE CONTROL SYSTEM › THROTTLE BODY

THROTTLE BODY > INSPECTION

for Preparation Click here



1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY


G037691E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      1(M-) - 2 (M+)
      0.3 to 100 Ω at 20°C (68°F)
      3 (E2) - 5 (VC)
      2.0 to 4.0 kΩ at 20°C (68°F)

      If the result is not as specified, replace the throttle body.