Home › TRANSMISSION ยท A340F AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > TERMINALS OF ECM

for Preparation Click here



C121776E02

HINT:
The standard voltage of each ECM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition". Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
E4-22 (THOC) - E4-28 (E2)
GR - BR
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
E5-8 (S2) - E4-3 (E1)
L-W - BR
S2 solenoid signal
2nd or 3rd gear
11 to 14 V
1st or 4th gear
Below 1 V
E5-9 (S1) - E4-3 (E1)
W-G - BR
S1 solenoid signal
1st or 2nd gear
11 to 14 V
3rd or 4th gear
Below 1 V
E5-11 (SLU+) - E5-10 (SLU-)
V - LG
SLU solenoid signal
3rd (lock-up) or 4th (lock-up) gear
Pulse generation
E5-12 (SLT+) - E5-13 (SLT-)
G-B - R-B
SLT solenoid signal
Engine is idling
Pulse generation
E5-24 (THO1) - E4-28 (E2)
Y-B - BR
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
E5-34 (NCO+) - E5-26 (NCO-)
Y - L
Speed sensor (NCO) signal
Engine is idling (P or N position)
Pulse generation
(See waveform 1)
E5-35 (SP2+) - E5-27 (SP2-)
G - R
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 2)
E7-4 (STP) - E4-3 (E1)
L - BR
Stop light switch signal
Brake pedal is depressed
11 to 14 V
Brake pedal is released
Below 1 V
E7-9 (L) - E4-3 (E1)
G-Y - BR
L shift position switch signal
Ignition switch ON and shift lever in L
11 to 14 V
Ignition switch ON and shift lever not in L
Below 1 V
E7-10 (2) - E4-3 (E1)
R-Y - BR
2 shift position switch signal
Ignition switch ON and shift lever in 2
11 to 14 V
Ignition switch ON and shift lever not in 2
Below 1 V
E7-11 (R) - E4-3 (E1)
R - BR
R shift position switch signal
Ignition switch ON and shift lever in R
11 to 14 V
Ignition switch ON and shift lever not in R
Below 1 V
E7-19 (3) - E4-3 (E1)
Y - BR
3 shift position switch signal
Ignition switch ON and shift lever in 3
11 to 14 V
Ignition switch ON and shift lever not in 3
Below 1 V
E7-21 (D) - E4-3 (E1)
L-B - BR
D shift position switch signal
Ignition switch ON and shift lever in D
11 to 14 V
Ignition switch ON and shift lever not in D
Below 1 V
E7-22 (N) - E4-3 (E1)
L-W - BR
N shift position switch signal
Ignition switch ON and shift lever in N
11 to 14 V
Ignition switch ON and shift lever not in N
Below 1 V
E7-23 (P) - E4-3 (E1)
G-B - BR
P shift position switch signal
Ignition switch ON and shift lever in P
11 to 14 V
Ignition switch ON and shift lever not in P
Below 1 V
E8-11 (L4) - E4-3 (E1)
Y-B - BR
Transfer L4 shift position switch signal
Ignition switch ON and transfer shift lever in L4
Below 1 V
Ignition switch ON and transfer shift lever not in L4
11 to 14 V
E8-30 (NSW) - E4-3 (E1)
V - BR
Park/neutral position switch signal
Ignition switch ON and shift lever in P or N
Below 1 V
Ignition switch ON and shift lever not in P and N
11 to 14 V

Waveform 1
G020663E04
Terminal
NCO+ - NCO-
Tool setting
1 V/DIV, 2 ms/DIV
Vehicle condition
Engine is idling (P or N position)

Waveform 2
G020664E05
Terminal
SP2+ - SP2-
Tool setting
2 V/DIV, 20 ms/DIV
Vehicle condition
Vehicle speed 20 km/h (12 mph)