Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › AIRBAG SYSTEM

AIRBAG SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here


HINT:
By accessing the Data List displayed on the Techstream, you can perform such functions as reading the values of switches and sensors without removing any parts. Reading the Data List is the first step of troubleshooting and is one method to shorten labor time.


DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to the ON position and turn the Techstream on.

  3. Follow the display on the Techstream screen to enter the "Data List".

  4. Check the condition by referring to the table below.

    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Driver Seat Position
    Seat position (Driver side)/
    FORWARD: Seat position is forward
    BKWARD: Seat position is rearward
    FAIL: A failure is detected
    FORWARD/BKWARD
    -
    Passenger Classification(*1)
    Passenger classification/
    NG: Data is not determined
    NONE: Vacant
    CHILD: Child (less than 36 kg (79.37 lb)) is seated
    SMALL: Adult (36 to 54 kg (79.37 to 119.05 lb)) is seated
    REGULAR: Adult (More than 54 kg (119.05 lb)) is seated
    FAIL: A failure is detected
    NG/NONE/CHILD/SMALL/REGULAR
    -
    Driver Buckle SW
    Buckle switch (Driver side)/
    UNSET: The seat belt is not fastened
    SET: The seat belt is fastened
    NG: Data is not determined
    UNSET/SET
    -
    Passenger Buckle SW
    Buckle switch (Right side)/
    UNSET: The seat belt is not fastened
    SET: The seat belt is fastened
    NG: Data is not determined
    UNSET/SET
    -
    Display Type Information
    Display type identification information/
    LR: The display is indicated by LH/RH
    DP: The display is indicated by Driver/Passenger
    DP
    -
    *1: Separate Seat